diff options
| -rw-r--r-- | docs/src/docs.rs | 387 |
1 files changed, 0 insertions, 387 deletions
diff --git a/docs/src/docs.rs b/docs/src/docs.rs deleted file mode 100644 index c12b737..0000000 --- a/docs/src/docs.rs +++ /dev/null @@ -1,387 +0,0 @@ -// Auto-generated code. - - -/// From ./docs/Documents/ASCII_YIZI.txt -pub const ASCII_YIZI: &str = "#BANNER START# - ████████ ████████ -██▒▒▒▒▒▒▒▒██ ██▒▒▒▒▒▒▒▒██ -██ ▒▒██ ██▒▒ ██ █████ ██ ██ ██████ █████ -██ ▒▒████████▒▒ ██ ▒▒▒██ ██ ██ ██████ ██████ -██ ▒▒▒▒▒▒▒▒ ██ ██ ██ ██ ███▒▒▒█ █▒▒▒▒█ -██ ██ ██ ██ ██ ███ ▒ ████ ▒ -██ ██ ██ ██ ██ ███ ▒████ -██ ████ ████ ██ ██ ▒██ ██▒ ███ ▒▒▒██ -██ ████ ████ ██ █ ██ ██ ██ ███ █ ██ ██ -██ ████ ████ ██ █ ██ ▒████▒ ▒██████ ██████ -██ ▒▒▒▒ ▒▒▒▒ █ ██ ▒████ ▒██▒ ██████ ▒████▒ -██ ██ ██ ▒▒▒▒ ▒▒ ▒▒▒▒▒▒ ▒▒▒▒ -██ ██████████ ██ -██ ██ {banner_line_1} - ████████████████████████████████ {banner_line_2} - ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ {banner_line_3} -#BANNER END#"; - - - -/// From ./docs/Documents/docs\collaboration.txt -pub const DOCS_COLLABORATION: &str = "NO CONTENT YET :("; - - - -/// From ./docs/Documents/docs\get_started.txt -pub const DOCS_GET_STARTED: &str = "NO CONTENT YET :("; - - - -/// From ./docs/Documents/profiles\vault.toml -pub const PROFILES_VAULT: &str = "# -# -# ████████ ████████ -# ██▒▒▒▒▒▒▒▒██ ██▒▒▒▒▒▒▒▒██ -# ██ ▒▒██ ██▒▒ ██ █████ ██ ██ ██ ██ -# ██ ▒▒████████▒▒ ██ ▒▒▒██ ██ ██ ██ ██ -# ██ ▒▒▒▒▒▒▒▒ ██ ██ ██ ██ ██ ██ -# ██ ██ ██ ██ ██ ██ ██ -# ██ ██ ██ ██ ██ ██ ██ -# ██ ████ ████ ██ ██ ▒██ ██▒ ▒██ ██▒ -# ██ ████ ████ ██ █ ██ ██ ██ ██ ██ -# ██ ████ ████ ██ █ ██ ▒████▒ ▒████▒ -# ██ ▒▒▒▒ ▒▒▒▒ █ ██ ▒████ ▒██▒ ▒██▒ -# ██ ██ ██ ▒▒▒▒ ▒▒ ▒▒ -# ██ ██████████ ██ -# ██ ██ -# ████████████████████████████████ JustEnoughVCS Vault Profile -# ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ =========================== -# -# - -# Vault \"{vault_name}\" created by {user_name} ({date_format}) - -######################### -### Base Informations ### -######################### -name = \"{vault_name}\" -uuid = \"{vault_uuid}\" # Don't touch it! - -# Administrator list, indicating members who can switch identity to 'host' -hosts = [] - -[profile] - -#################### -### Connectivity ### -#################### - -# Bind address: 127.0.0.1 for localhost only, 0.0.0.0 to allow remote access -bind = \"127.0.0.1\" # (fallback: \"127.0.0.1\") - -# Bind port -port = 25331 # (fallback: 25331) - -# Enable LAN discovery: clients can discover this service on the local network -# TIP: Not yet supported -lan_discovery = \"disable\" # (enable, disable, fallback: disable) - -############# -### Debug ### -############# - -# Enable logger -logger = \"yes\" # (yes, no, fallback: no) - -# Logger output level -logger_level = \"info\" # (debug, trace, info, fallback: info) - -################################# -### Authentication & Security ### -################################# - -# Authentication mode -# TIP: Currently only \"key\" is supported -auth_mode = \"key\" # (key, password, noauth, fallback: password)"; - - - -/// From ./docs/Documents/README.md -pub const README: &str = "# JustEnoughVCS"; - - - -/// From ./docs/Documents/readmes\local_workspace_todolist.md -pub const READMES_LOCAL_WORKSPACE_TODOLIST: &str = "# Setup a Workspace - -You have created an empty local **Workspace** using `jv create` or `jv init`. - -At this point, the workspace exists only as a local structure. -It is **not yet associated with any identity or upstream Vault**. - -Follow the steps below to complete the initial setup. - -## Account Setup - -> [!TIP] -> If you have already registered an account on this machine, you can skip this section. - -An account represents **this machine acting on your behalf**. -You can create an account and generate a private key using the following commands. - -```bash -# Make sure OpenSSL is installed on your system. -# Create an account and automatically generate a private key using OpenSSL. -jv account add pan --keygen - -# If you already have a private key, you can associate it with an account. -jv account movekey pan ./your_private_key.pem -``` - -After creating the private key, generate the corresponding public key. -This also requires `OpenSSL` support. - -```bash -# Generate the public key in the current directory. -jv account genpub pan ./ -``` - -**Send the generated public key file to a Host of the upstream Vault.** -Only after the key is registered by the Vault can this workspace authenticate. - -## Login - -> In the following example, we assume: -> -> * the account name is `pan` -> * the upstream Vault address is `127.0.0.1` - -Navigate to the workspace directory (the directory containing this file), then run: - -```bash -# Log in as pan to the upstream Vault at 127.0.0.1 -# -C skips confirmation prompts -jv login pan 127.0.0.1 -C -``` - -This command performs the following steps internally: - -```bash -jv account as pan # Bind the workspace to account pan -jv direct 127.0.0.1 -C # Set the upstream Vault address -jv update # Fetch initial structure and metadata from upstream -rm SETUP.md # Remove this setup document -``` - -After login, the workspace becomes a **live participant** connected to the upstream Vault. - -## Completion - -At this point, the workspace is fully set up: - -* An account identity is bound locally -* An upstream Vault is configured -* Initial data has been synchronized - -Normally, `jv login` removes this file automatically. -If the file still exists due to a deletion failure, please remove it manually to keep the workspace clean. - -Once this file is gone, the workspace is considered **ready for daily use**. - -## Why does this file delete itself? - -A freshly created JVCS workspace is considered **clean** only when no sheets are in use and no unexplained files exist. - -During the initial setup phase, this `SETUP.md` file is the only allowed exception. -It exists solely to guide the workspace into a connected and explainable state. - -Once the workspace is connected to an upstream Vault and enters normal operation, -every file in the workspace is expected to be **explainable by structure**. - -If this setup file remains: - -* it becomes an unexplained local file -* `JustEnoughVCS` cannot determine which sheet it belongs to -* and any subsequent `jv use` operation would be ambiguous - -To prevent this ambiguity, JVCS enforces a strict rule: - -**A workspace with unexplained files is not allowed to enter active use.** - -Deleting `SETUP.md` marks the end of the setup phase and confirms that: - -* all remaining files are intentional -* their placement can be explained -* and the workspace is ready to participate in structure-driven operations - -This is why the setup document removes itself. -It is not cleanup — it is a boundary."; - - - -/// From ./docs/Documents/readmes\vault_readme.md -pub const READMES_VAULT_README: &str = "# Setup an Upstream Vault - -Thank you for using `JustEnoughVCS`. - -This document guides you through setting up an **Upstream Vault** — a shared source of structure and content that other workspaces may depend on. - -## Configuration File - -Before starting the Vault service with `jvv listen`, you need to configure `vault.toml`. - -This file defines the identity, connectivity, and responsibility boundaries of the Vault. - -### Adding Hosts - -Set the `hosts` parameter to specify which members are allowed to switch into the **Host** role for this Vault. - -```toml -# Pan and Alice are allowed to operate this Vault as hosts -hosts = [ \"pan\", \"alice\" ] -``` - -Members listed here can switch their identity as follows: - -```bash -jv as host/pan -``` - -> Becoming a Host means operating from a position that may affect other members. -> This role is not a permanent identity, but a responsibility-bearing context. - -### Configuring Connection - -Modify the `bind` parameter to `0.0.0.0` to allow access from other devices on the local network. - -```toml -bind = \"0.0.0.0\" -``` - -> [!TIP] -> `JustEnoughVCS` uses port **25331** by default. -> You can change the listening port by modifying the `port` parameter if needed. - -### Disabling Logger (Optional) - -If you prefer a cleaner console output, you can disable logging: - -```toml -logger = \"no\" -``` - -## Member Account Setup - -Run the following command in the root directory of the **Vault** to register a member: - -```bash -jvv member register pan -``` - -Registering a member only creates its identity record in the Vault. -It does **not** automatically make the member login-ready. - -An authentication method must be registered separately. - -> [!NOTE] -> Currently, `JustEnoughVCS` supports **key-based authentication** only. - -Place the public key file provided by the member (`name.pem`) into the Vault’s `./key` directory. - -For example, after registering a member named `pan`, the Vault directory structure should look like this: - -``` -. -├── key -│ └── pan.pem <- Public key file -├── members -│ ├── pan.bcfg <- Member registration info -│ └── host.bcfg -├── README.md -├── sheets -│ └── ref.bcfg -├── storage -└── vault.toml -``` - -## Completion - -At this point, the Vault is fully configured: - -* Member identities are registered -* Host roles are defined -* Authentication materials are in place - -You can now start the Vault service using: - -```bash -jvv listen -``` - -Other workspaces may connect to this Vault once it is listening."; - - - -/// From ./docs/Documents/web_docs\guide.md -pub const WEB_DOCS_GUIDE: &str = "# FIRST - -ok"; - - - -/// From ./docs/Documents/_navbar.md -pub const _NAVBAR: &str = "* [Home](/) -* [GitHub](https://github.com/JustEnoughVCS/) -* [Main Repo](https://github.com/JustEnoughVCS/VersionControl)"; - - - -/// From ./docs/Documents/_sidebar.md -pub const _SIDEBAR: &str = "* Getting Started - * [Introduction](README.md) - -* USER - * [Workspace Setup](web_docs/workspace_setup.md) - -* ADMIN - * [Vault Setup](web_docs/vault_setup.md)"; - - -// Get document content by name -pub fn document(name: impl AsRef<str>) -> Option<String> { - match name.as_ref() { - - "ascii_yizi" => Some(ASCII_YIZI.to_string()), - - "docs_collaboration" => Some(DOCS_COLLABORATION.to_string()), - - "docs_get_started" => Some(DOCS_GET_STARTED.to_string()), - - "profiles_vault" => Some(PROFILES_VAULT.to_string()), - - "readme" => Some(README.to_string()), - - "readmes_local_workspace_todolist" => Some(READMES_LOCAL_WORKSPACE_TODOLIST.to_string()), - - "readmes_vault_readme" => Some(READMES_VAULT_README.to_string()), - - "web_docs_guide" => Some(WEB_DOCS_GUIDE.to_string()), - - "_navbar" => Some(_NAVBAR.to_string()), - - "_sidebar" => Some(_SIDEBAR.to_string()), -_ => None, - } -} - -// Get list of all available document names -pub fn documents() -> Vec<String> { - vec![ - "ascii_yizi".to_string(), - "docs_collaboration".to_string(), - "docs_get_started".to_string(), - "profiles_vault".to_string(), - "readme".to_string(), - "readmes_local_workspace_todolist".to_string(), - "readmes_vault_readme".to_string(), - "web_docs_guide".to_string(), - "_navbar".to_string(), - "_sidebar".to_string(), - ] -} |